Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Pad Replacement on Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Brake pads

Replace the brake pads on the Jeep Compass. Lift the vehicle and remove the wheel on the side where you need to replace the brake pads. Unscrew the caliper locking pin, then remove the caliper from the wheel hub. Use a screwdriver to remove the pads from the caliper, then take off the brake caliper (replace the disc if damaged). Fit the new brake pads onto the caliper, then refit the brake caliper onto the brake disc. Tighten all pins and refit the wheel. Replace all the brake pads on the other brakes of the vehicle.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Jeep Compass MK1
Replacing the Front Brake Pads on the Jeep Compass MK1
Jeep Compass (2006-2016 / MK 1, MK 49) In this guide, you will find step-by-step instructions to remove and replace the front brake pads on the first series Jeep Compass. First, lift the v…
How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos