Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on the Jeep Compass MK1

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Brake pads

In this guide, you will find step-by-step instructions to remove and replace the front brake pads on the first series Jeep Compass. First, lift the vehicle and remove the front wheel; then unscrew the fixing screws of the front brake caliper to remove it from the disc, as shown in the video. At this point, unscrew the two screws of the brake line, removing the caliper and the pads; clean the caliper of any residual dirt. Finally, leverage the piston to insert the new pads, following the video until the end!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Brake Pad Replacement on Jeep Compass
Brake Pad Replacement on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Replace the brake pads on the Jeep Compass. Lift the vehicle and remove the wheel on the side where you need to replace the brake pads. Unscrew the c…
How to Temporarily Disable the Handbrake on a Jeep Compass to Replace the Brake Pads?
How to Temporarily Disable the Handbrake on a Jeep Compass to Replace the Brake Pads?
Jeep Compass (2016-2025 / 552, MK 2) This short tutorial shows how to temporarily disable the handbrake on a Jeep Compass to replace the rear brake pads. This procedure will put the car …
How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos