Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulbs on a Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Headlight bulb

Are your headlight bulbs blown? Here’s how to replace the front headlight bulbs on a Jeep Compass. Unscrew the plastic cover at the bottom of the bumper with a screwdriver to access the side fog light in the headlight. After removing the bulb holder, take out the damaged bulbs and fit new ones (same size and voltage). Refit the plastic cover on the front headlight of the vehicle. Perform this replacement on both front and rear lights to maintain consistent illumination. Test whether the bulbs are working.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
How to Replace the Headlamp Bulbs on a Jeep Compass
How to Replace the Headlamp Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Follow these steps to replace the headlamp bulbs on a Jeep Compass: open the bonnet by pulling the lever located at the bottom right of the dashboard…
Replacing the Rear Bulbs on Jeep Compass
Replacing the Rear Bulbs on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlight bulbs on a Jeep Compass and other Jeep models, start by lifting the boot lid. Now, using a flathead screwdriver, detac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos