Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on a Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Headlight bulb

Do you want to replace the front headlight bulbs? Lift the front bonnet and let's look at the disassembly. Remove the cover located in the plastic wheel arch liner of the front wheel to access the headlight in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover of the wheel arch liner. You can also replace the front headlight bulbs from inside the engine bay (depending on the type of bulb). Test the correct operation of the bulbs after installation.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
Replacing the Front Headlight Bulbs on a Jeep Compass
Replacing the Front Headlight Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Are your headlight bulbs blown? Here’s how to replace the front headlight bulbs on a Jeep Compass. Unscrew the plastic cover at the bottom of the bum…
How to Replace the Headlight Bulbs on a Jeep Compass?
How to Replace the Headlight Bulbs on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlight bulbs on a Jeep Compass, lift the bonnet to access the rear of the headlamp. There will be a plastic cover that needs …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos