Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the position light bulb on a Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Light bulb

See other generations:
Video tutorial

To replace the position light bulb on a Jeep Compass, loosen the screws that secure the inner cover of the wheel arch corresponding to the bulb to be replaced: once all screws are removed, you can detach the inner cover of the wheel arch and access the back of the bulb.

Disconnect the bulb from its connector and remove it from its housing to replace it with a new one. After the new bulb is connected, insert it back into its housing and reattach the corresponding wheel arch cover.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
How to Replace the Position Lights on Jeep Compass?
How to Replace the Position Lights on Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the position lights on the Jeep Compass, remove the internal cover cap of the headlamp to access the bulb. Next, disconnect the bulb from …
How to Replace the Rear Light Bulb on a Jeep Compass
How to Replace the Rear Light Bulb on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you start, open the tailgate of your Jeep Compass. Begin by unclipping and removing the clips that secure the rear light to the vehicle. Next,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos