Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Lights on Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Light bulb

See other generations:
Video tutorial

To replace the position lights on the Jeep Compass, remove the internal cover cap of the headlamp to access the bulb. Next, disconnect the bulb from its connector and replace it with the new bulb.

At this point, insert the new bulb into its socket: this procedure can also be performed for the daytime running lights and main beam headlights. After replacing the bulbs, reattach the internal cover cap of the headlamp and check the correct operation of the new bulbs.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Side Lights in the Jeep Compass?
How to Replace the Side Lights in the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) As shown in this tutorial, replacing the side lights in the Jeep Compass is a very simple and quick operation. First, steer the wheel towards the sid…
Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
How to replace the position light bulb on a Jeep Compass?
How to replace the position light bulb on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To replace the position light bulb on a Jeep Compass, loosen the screws that secure the inner cover of the wheel arch corresponding to the bulb to be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos