Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to replace the parking lights in the Jeep Compass?

Jeep Compass - Video tutorial

Model: Jeep Compass 552, MK 2 - Years 2016-2024
Part: Headlight bulb
Operation: How to replace the parking lights in the Jeep Compass?

As we can see in this tutorial, replacing the sidelights on your Jeep Compass is a very simple and fast operation. First of all, steer the wheel on the side where we are going to work inwards, then unscrew the two bolts located in the internal front area of the wheel arch. Once this is done, move the latter slightly, locate the bulb in question, disconnect the power connector and turn the bulb holder anticlockwise. At this point we can replace the bulb, reassemble everything following the reverse procedure and repeat the operation for the opposite side.


Posted on 2 December 2022 by ScegliAuto



How do you replace the parking lights on the Jeep Compass?
Jeep Compass (2016-2024 / 552, MK 2) In order to replace the parking lights on the Jeep Compass, the internal cover cap of the headlight must be removed to gain access to the bulb. Subse
How to activate or deactivate the parking brake on the Jeep Compass.
Jeep Compass (2016-2024 / 552, MK 2) Today's guide will show us how to safely activate or deactivate the parking brake of the Jeep Compass, as well as the Renegade. First, we get inside
How to activate and deactivate the parking sensors on the Jeep Compass
Jeep Compass (2016-2024 / 552, MK 2) Let's see in this short and simple guide how to activate or deactivate the parking sensors on the 2018 Jeep Compass, second series, by following the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos