Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on a Jeep Compass?

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Control arm

To replace the wishbone on a Jeep Compass, lift the car with a jack or ramp so that the wheels are not in contact with the ground. Then, loosen the bolts securing the corresponding wheel and remove it completely. Behind it, locate the wishbone, which must be freed from the hub and driveshaft by unscrewing the relevant securing bolts. Once the bolts are loosened, completely remove the wishbone and replace it with a new one, reassembling all previously removed components.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Control Arms on a Jeep Compass?
How to Replace the Control Arms on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To replace the steering control arms on a Jeep Compass, first loosen all the bolts securing the wheel corresponding to the control arm to be replaced…
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos