Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : Where is the fuse box located in the Jeep Compass?

Jeep Compass - Video tutorial

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Fuse box
Operation: Where is the fuse box located in the Jeep Compass?

If you own a first-generation Jeep Compass, specifically a model produced between 2007 and 2010, and want to find out where the fuse box is located, then simply read the following guide carefully to be able to locate it in just a few seconds. First, turn off the vehicle and fully lift the front hood. Then, position the safety arm and focus your attention on the right side of the engine compartment to locate the fuse box. Finally, remove the cover of the fuse box to access the fuses.


Posted on 17 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Compass 2006-2016 - Where is the headlight fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuse boxes located in the Jeep Compass? Read Answer
    • Compass 2016-2025 - Where are the fuse boxes located on the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the fuse box located on Jeep Compass? Read Answer
    • Compass 2006-2016 - Where is the Jeep Compass cigarette lighter fuse located? Read Answer
    • Compass 2016-2025 - Where is the Start & Stop system fuse located in the Jeep Compass? Read Answer
    • Compass 2006-2016 - Where are the fuses of the Jeep Compass located? Read Answer
    • Compass 2016-2025 - Why does the Start and Stop of a Jeep Compass not work? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos