Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Tire pressure warning light

In order to reset the tire pressure light of the Jeep Compass, you need to turn on the instrument panel, identify the tire that has insufficient pressure, and inflate it to the recommended pressure level. This value is indicated on the driver's side door, on a sticker attached in that position. Once this tire has been inflated, you can start the engine and drive for a few kilometers. The sensors will then be able to read the new pressure values and turn off the warning light.

Posted on 23 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Jeep Compass?
How do you reset the tire pressure light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) In order to make the tire pressure warning light disappear from the instrument panel of the Jeep Compass, you will first need to adjust the tires to …
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
Resetting the Tyre Pressure Warning Light on Jeep Compass
Resetting the Tyre Pressure Warning Light on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video, you can see how to reset the tyre pressure warning light on a Jeep Compass by following a few simple steps necessary for the proper fu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos