Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front bumper of the Jeep Wrangler JK?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Front bumper

Following a collision, the need to repair or replace, or simply because you want to make aesthetic modifications or other changes, arises the need to remove the front bumper of a car, just like for the model of vehicle in question. Let's find out the operational procedure in this video guide: It is necessary to remove the locking pins of the anti-collision steel plate under the bumper, then move on to the next pins, always at the back and finally at the top. Before pulling the aforementioned bumper outwards to detach it completely, it is important to remember to disconnect the rear electrical connectors.

Posted on 9 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Jeep Wrangler
How to Remove the Front Bumper of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To remove the front bumper of the Jeep Wrangler, use a lever tool to remove the rivets securing the air dam located at the bottom of the bumper. Two …
How to Remove the Rear Bumper on Jeep Wrangler
How to Remove the Rear Bumper on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) How to remove the rear bumper from a stunning Jeep Wrangler? Follow these steps: it’s not too complex if done in order. First, use a socket spanner o…
How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos