Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Grille of the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Grille

In this brief and simple guide, remove the front grille of the Jeep Wrangler by following the instructions below. First, open the bonnet of your vehicle and start by removing the six plastic clips located at the top of the grille using a thin plastic lever. Then, unclip and gently remove the grille as shown in the video. At this point, install the new grille, securing it properly with the new clips, following the video to the end!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front grille of a Jeep Wrangler?
How to remove the front grille of a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) To remove the front grille of a Jeep Wrangler, follow these steps. Start by opening the front hood and locate the upper fastening screws of the grill…
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to replace the front headlight of the Jeep Wrangler
How to replace the front headlight of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) The instructions in this guide will show you how to remove and replace the front headlight of the Jeep Wrangler. First, open the bonnet of the vehicl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos