Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on Jeep Compass

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Rear bumper

Is the rear bumper of the Jeep Compass due for replacement? Here’s how to remove it from the rear. Using a socket wrench or battery-powered screwdriver, unscrew the securing bolts located on the spare wheel (remove it). Lift the vehicle with a column lift, remove the metal bar located at the bottom of the bumper; remove the bolts on the sides of the car's bumper. Once the bumper is free from any screws or bolts, grasp it with your hands and pull it away from the bodywork (disconnect any power cables). Fit the new bumper, screw in the securing screws, and finally reattach the spare wheel.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper on Jeep Wrangler
How to Remove the Rear Bumper on Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) How to remove the rear bumper from a stunning Jeep Wrangler? Follow these steps: it’s not too complex if done in order. First, use a socket spanner o…
How to Remove the Front Bumper of the Jeep Wrangler
How to Remove the Front Bumper of the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) To remove the front bumper of the Jeep Wrangler, use a lever tool to remove the rivets securing the air dam located at the bottom of the bumper. Two …
How do you remove the front bumper of the Jeep Wrangler JK?
How do you remove the front bumper of the Jeep Wrangler JK?
Jeep Wrangler (2007-2018 / MK 3, JK) Following a collision, the need to repair or replace, or simply because you want to make aesthetic modifications or other changes, arises the need to…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos