Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Jeep Wrangler?

Model: Jeep Wrangler JL, MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

Unlike most cars where you are used to opening the bonnet by pulling an internal lever near the footwell, the Jeep Wrangler uses a completely different method. There is no internal lever to pull; instead, as clearly shown in the video, you need to release the catches located on both sides of the bonnet at the front, then move to the front grille area of the bonnet, where there is a classic catch that also needs to be disengaged by pressing it. Once lifted, the bonnet will stay in position thanks to hydraulic struts.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of the Jeep Wrangler Mk3
How to Open the Bonnet of the Jeep Wrangler Mk3
Jeep Wrangler (2007-2018 / JK, MK 3) .. This guide shows how to open the bonnet of the Jeep Wrangler Mk3 engine compartment. The operation to open the engine.. …
How to open the hood of a Jeep Wrangler?
How to open the hood of a Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) In this tutorial we can see how to open the hood in the Jeep Wrangler, an extremely simple operation that is different from the typical procedure of …
How do you deactivate the Start&Stop feature of the Jeep Wrangler?
How do you deactivate the Start&Stop feature of the Jeep Wrangler?
Jeep Wrangler (2018-2026 / JL, MK 4) To deactivate the Start&Stop system of the Jeep Wrangler, you need to start the engine by turning the key in the corresponding slot: once the dashboa…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos