Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of a Jeep Gladiator

Model: Jeep Gladiator JT - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bumper

Video tutorial

Today, learn how to remove the rear bumper of a Jeep Gladiator, a model produced from 2020 onward. Start by removing the rear license plate to access the two screws located behind it. Next, move inside the bumper to disconnect all the various connectors and wiring for the taillights.

Once that is done, using a 16mm wrench, unscrew the nuts of the bolts that hold the rear bumper in place: three nuts on the right side and three on the left side. Finally, remove the bumper to complete the job.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Where is the Spare Tire Located on the Jeep Gladiator?
Where is the Spare Tire Located on the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) To access the spare tire on the Jeep Gladiator, lift the rear seat cushion to reach the components underneath. Here, you will find the spare tire rep…
Where is the fuse box located in the Jeep Gladiator?
Where is the fuse box located in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…
How to Replace the Key Battery in a 2022 Jeep Gladiator
How to Replace the Key Battery in a 2022 Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) If the smart key for your new Jeep Gladiator has suddenly stopped working, it's time to replace the battery inside. This guide provides all the neces…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos