Do it yourself
| ||||
|
Jeep Gladiator - Video tutorial
Model: Jeep Gladiator
JT
- Years 2020-2024 If the smart key of your new Jeep Gladiator has suddenly stopped working, it means that it is time to replace the battery mounted inside it. In the following guide you will find all the necessary information. First, get a common flat screwdriver and use it to easily remove the back cover of the key. Once this is done, use the screwdriver again to remove the used battery as well and proceed with inserting the new one (model CR2450). Finally, put back the back cover you removed earlier and you're done.
Posted on 4 June 2023 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |