Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Gladiator
    4. : Where is the spare wheel of the Jeep Gladiator?

Jeep Gladiator - Video tutorial

Model: Jeep Gladiator JT - Years 2020-2024
Part: Wheel
Operation: Where is the spare wheel of the Jeep Gladiator?

In order to reach the spare wheel of the Jeep Gladiator you have to go to raise the sofa of the rear seats, so that you have access to the components below. Here you will find the wheel replacement kit that must be used to remove the spare wheel from its housing: insert the key present in the kit into the hole located above the rear bumper, unscrewing the screw inside. By unscrewing this screw, the spare wheel will come down from the lower floor of the car and can be used to replace one of the wheels of the vehicle.


Posted on 9 May 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos