Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper on a Jeep Cherokee

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper on a Jeep Cherokee, access the underside of the vehicle to unscrew all the bolts securing the bumper from below. Once all the screws at the bottom are removed, unscrew those located on the side of the piece so that the old bumper can be completely removed from its housing.

This will allow you to position the new replacement piece, securing it with the screws at the bottom and sides.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Jeep Cherokee (1984-2001 / MK 2, XJ) In this tutorial, you will see how to remove the rear bumper on the Jeep Cherokee CJ, a very simple and quick operation. Since the fixing bolts are l…
Jeep Cherokee (2013-2023 / KL, MK 5) Today, in this short and simple guide, we will see the procedure to remove and replace the front bumper of a Jeep Cherokee. First, open the bonnet of…
Jeep Cherokee (1984-2001 / MK 2, XJ) To remove the front bumper from a Jeep Cherokee, access the inside of the bumper to disconnect the underlying connectors. Once these are disconnected…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos