Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How do you remove the front bumper of the Jeep Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Front bumper
Operation: How do you remove the front bumper of the Jeep Cherokee?

In order to replace the front bumper of the Jeep Cherokee you need to go to the inside of the bumper, so that you can disconnect the connectors below. Once these have been disconnected, it will be possible to loosen the bolts in the lower part of the bumper, next to the fog lights. In this way it will be possible to detach the side plastic covers of the bumper, accessing the screws below which can be unscrewed in turn. When all these screws have been removed, it will be possible to detach the front bumper, replacing it with a new one.


Posted on 12 September 2022 by ScegliAuto



How to remove front bumper from Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Today we will see, in this short and simple guide, the procedure that will allow us to disassemble and replace the front bumper of the Jeep Cherokee.
How do i remove the headlight of my Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) Replacing the headlight of your Jeep Cherokee is a very simple operation. To access it better, first of all you need to remove the front bumper by un
How do you remove the rear bumper of the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) In order to replace the rear bumper of the Jeep Cherokee you have to go to the lower part of the vehicle so that you can unscrew all the bolts that s

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos