Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulbs on the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fog lights

See other generations:
Video tutorial

Today, follow these instructions to remove and replace the front fog light bulbs on the Jeep Cherokee in simple steps. First, raise the vehicle and begin by removing the front wheel; then remove the plastic cover from the front wheel arch and take off the fog light protective cap, as shown in the video.

At this point, disconnect the electrical connector to remove the fog light bulb, replacing it with a new one (with the same fitting); refit and connect the bulb, finally securing the protective cap!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Fuse Box of the Jeep Liberty/Cherokee
Fuse Box of the Jeep Liberty/Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) This vehicle model has a fuse box located in the engine bay on the left side next to the battery. The box is protected by a plastic cover, under whic…
How to Turn Off the Interior Lights of the Jeep Cherokee
Jeep Cherokee (2002-2007 / MK 3, KJ) If you want to adjust the brightness of the interior lights, or if you intend to turn them off completely, you can find the necessary instructions be…
How to Replace the Front Brake Pads on a Jeep Cherokee
How to Replace the Front Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Follow the procedure below to remove and replace the front brake pads on a Jeep Cherokee. First, lift the vehicle and remove the front wheel. Next, u…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos