Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Brake pads

Follow the procedure below to remove and replace the front brake pads on a Jeep Cherokee. First, lift the vehicle and remove the front wheel. Next, undo the bolts securing the brake caliper using a socket spanner, allowing you to remove the old pads as shown in the video. At this point, clean the caliper of dirt and use a lever inside the caliper to retract the piston. Finally, install the new pads and reassemble everything!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Jeep Cherokee?
How to Replace the Front Brake Pads on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the front brake pads on the Jeep Cherokee, lift the car with a jack so that the corresponding wheel is not in contact with the ground. Thi…
Replacing Brake Pads on a Jeep Cherokee
Replacing Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Are the brake pads due for replacement? Let's see how to remove them from the front brakes of a Jeep Cherokee. Lift the vehicle with a column lift (j…
How to replace the brake pads of the Jeep Grand Cherokee
How to replace the brake pads of the Jeep Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Replacing the parking brake pads on the Jeep Cherokee is a somewhat complex operation to perform. We begin the replacement by lifting the vehicle in …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos