Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Brake pads

To replace the front brake pads on the Jeep Cherokee, lift the car with a jack so that the corresponding wheel is not in contact with the ground. This will allow you to loosen all the bolts securing the wheel, completely removing it to access the underlying components. Here, you will need to loosen the bolts securing the brake caliper to the disc, extracting the old pads inside. This will allow you to insert the new pads, remounting the previously removed wheel.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Jeep Cherokee
How to Replace the Front Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Follow the procedure below to remove and replace the front brake pads on a Jeep Cherokee. First, lift the vehicle and remove the front wheel. Next, u…
Replacing Brake Pads on a Jeep Cherokee
Replacing Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Are the brake pads due for replacement? Let's see how to remove them from the front brakes of a Jeep Cherokee. Lift the vehicle with a column lift (j…
How to Replace the Rear Brake Pads on a Jeep Cherokee?
How to Replace the Rear Brake Pads on a Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) In this tutorial, you will see how to replace the rear brake pads on a Jeep Cherokee. First, lift the rear of the vehicle with a jack, then put the c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos