Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Brake pads

In this tutorial, you will see how to replace the rear brake pads on a Jeep Cherokee. First, lift the rear of the vehicle with a jack, then put the car in 'maintenance' mode via the appropriate menu indicated and disconnect the negative terminal of the battery. Next, remove the wheel, unscrew the lower bolt of the caliper, and hold it up with some wire or a zip tie. At this point, you can remove the old pads, clean the brackets of any debris, and fit the new parts. Finally, remember to deactivate 'maintenance' mode.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Jeep Cherokee
How to Replace the Front Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Follow the procedure below to remove and replace the front brake pads on a Jeep Cherokee. First, lift the vehicle and remove the front wheel. Next, u…
Replacing Brake Pads on a Jeep Cherokee
Replacing Brake Pads on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Are the brake pads due for replacement? Let's see how to remove them from the front brakes of a Jeep Cherokee. Lift the vehicle with a column lift (j…
How to Replace the Front Brake Pads on the Jeep Cherokee?
How to Replace the Front Brake Pads on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the front brake pads on the Jeep Cherokee, lift the car with a jack so that the corresponding wheel is not in contact with the ground. Thi…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos