Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to change the battery on a Jeep Cherokee.

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Battery
Operation: How to change the battery on a Jeep Cherokee.

If we intend to replace the battery on our car because it is no longer efficient, in the following description we will find the indications and procedures to follow to carry out the replacement safely. Open the engine hood and the battery is located on the left. Use a socket wrench to unscrew the fastening screw of the lower locking plate. Then proceed to disconnect the negative pole first and then the positive one. Remove the upper protection and remove the battery and replace it with the new one, then proceed to reconnect the positive pole first and then the negative one.


Posted on 29 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Cherokee 1984-2001 - What is the position of the battery in the Jeep Grand Cherokee I? Read Answer
    • Cherokee 2013-2023 - Where is the battery in a 2018 Jeep Grand Cherokee? Read Answer
    • Cherokee 2013-2023 - Where is the battery of the Jeep Grand Cherokee 3.0 crd? Read Answer
    • Cherokee 2008-2012 - How much is the battery for the 2011 Jeep Cherokee? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos