Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Brake pads

Jeep Cherokee - Brake pads

Jeep Cherokee (2013-2023 / KL, MK 5)
How to replace the rear brake pads on a Jeep Cherokee?
In this tutorial, we can see how to replace the rear brake pads on a Jeep Cherokee. First of all, we lift the rear area of the car with a jack, then we put the …read all…
Posted on 31 May 2023 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How do you replace the front brake pads on the Jeep Cherokee?
In order to replace the front brake pads of the Jeep Cherokee you have to go and lift the car with a jack, so that the corresponding wheel is not in contact …read all…
Posted on 15 October 2022 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to replace the front brake pads on the Jeep Cherokee
Let's see below the procedure necessary for the disassembly and replacement of the front brake pads of the Jeep Cherokee. First we lift the car and start …read all…
Posted on 10 May 2024 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
Replacement of Jeep Cherokee brake pads
Do the brake pads need to be replaced now? Let's see how they dismount from the front brakes of a Jeep Cherokee. We lift with a column bridge (jack) to the …read all…
Posted on 1 December 2023 by ScegliAuto
Airbags (2) Alternator (2) Shock absorbers (1) Car stereo (8) Battery (8) Spark plugs (3) Control unit (1) Key (15) Timing belt (5) V-belt (3) -board computer (30) Checks and maintenance (29) Bearing (1) Mass air flow sensor (1) Headlight (4) Tail light (3) Air filter (5) Cabin air filter (9) Diesel filter (3) Hand brake (3) Light bulb (2) Headlight bulb (13) Rear light bulb (6) Interior lights ceiling light bulb (2) Handle (2) Engine (4) Window motor (1) Starter motor (3) Gear oil (2) Engine oil (7) Door panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Gear Shift Knob (1) Pump (1) Fuel pump (3) Window lift button (1) Instrument cluster (9) Radiator (3) Passenger compartment heating radiator (3) Wheel (4) Fuse box (16) Seat (3) Drive shaft (1) Parking sensors (1) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (2) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos