Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Air filter

Jeep Cherokee - Air filter

Jeep Cherokee (2013-2023 / KL, MK 5)
How to replace the air filter in the Jeep Cherokee?
In this video we can see how to replace the air filter in the Jeep Cherokee. For this simple operation we need a Phillips screwdriver. After getting the right …read all…
Posted on 23 August 2022 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to replace the air filter on the Jeep Cherokee?
The replacement of the Jeep Cherokee air filter is carried out by opening the hood and accessing the engine compartment, so that the box containing the filter …read all…
Posted on 11 August 2022 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to replace the air filter in the Jeep Cherokee
In today's video we see how to replace the air filter in the Jeep Cherokee. This operation is a very simple job, as you will see, which can be carried out in …read all…
Posted on 19 April 2024 by ScegliAuto
Jeep Cherokee (2002-2007 / KJ, MK 3)
How to remove the engine air filter on a Jeep Cherokee
Let's see how to remove the engine air filter on a Jeep Cherokee: we open the car door, pull up the engine compartment opening lever located at the bottom left …read all…
Posted on 7 November 2023 by ScegliAuto
Jeep Cherokee (1984-2001 / MK 2, XJ)
How to insert the filter on jeep Cherokee 4x4
How to remove and insert the air filter on jeep cherokee 4x4: open the car door, pull up the engine compartment opening lever located at the bottom left of the …read all…
Posted on 1 November 2023 by ScegliAuto
Airbags (2) Alternator (2) Shock absorbers (1) Car stereo (8) Battery (8) Spark plugs (3) Control unit (1) Key (15) Timing belt (5) V-belt (3) -board computer (30) Checks and maintenance (29) Bearing (1) Mass air flow sensor (1) Headlight (4) Tail light (3) Air filter (5) Cabin air filter (9) Diesel filter (3) Hand brake (3) Light bulb (2) Headlight bulb (13) Rear light bulb (6) Interior lights ceiling light bulb (2) Handle (2) Engine (4) Window motor (1) Starter motor (3) Gear oil (2) Engine oil (7) Door panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Gear Shift Knob (1) Pump (1) Fuel pump (3) Window lift button (1) Instrument cluster (9) Radiator (3) Passenger compartment heating radiator (3) Wheel (4) Fuse box (16) Seat (3) Drive shaft (1) Parking sensors (1) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (2) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos