Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to remove the engine air filter on a Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 3, KJ - Years 2002-2007
Part: Air filter
Operation: How to remove the engine air filter on a Jeep Cherokee

Let's see how to remove the engine air filter on a Jeep Cherokee: we open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the auction. We open the ventilation kit (unscrew the fastening screws of the sheets), uncover the filter box panel and extract the worn air filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the panel of the air box and tighten the screws. We close the front hood after maintenance.


Posted on 7 November 2023 by ScegliAuto



How to replace the air filter on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) The replacement of the Jeep Cherokee air filter is carried out by opening the hood and accessing the engine compartment, so that the box containing t
How to replace the air filter in the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) In today's video we see how to replace the air filter in the Jeep Cherokee. This operation is a very simple job, as you will see, which can be carrie
How to replace the air filter in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) In this video we can see how to replace the air filter in the Jeep Cherokee. For this simple operation we need a Phillips screwdriver. After getting

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos