Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Center console tunnel

Jeep Cherokee - Center console tunnel

Center Console Tunnel Jeep Cherokee (2008-2012 / mk 4, kk)

Jeep Cherokee (2008-2012 / MK 4, KK)
Replacing the Gear Selector Light Bulb on a Jeep Cherokee
Let's see how to replace the bulb that illuminates the gear selector of the automatic gearbox on a Jeep Cherokee. Using a flathead screwdriver, pry at the edge …Read all…
Posted on 30 July 2026 by ScegliAuto
Airbag (2) Alternator (2) Shocks (1) Car stereo (7) Battery (7) Transmission (1) Spark plugs (4) Body (2) Control unit (1) Key (22) Timing belt (7) V-belt (3) Onboard computer (6) Checks and maintenance (21) Bearing (1) MAF sensor (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (9) Diesel fuel filter (3) Parking brake (5) Light bulb (3) Headlight bulb (13) Tail light bulb (6) Interior dome light bulb (2) Handle (2) Engine (4) Power window motor (1) Starter motor (4) Transmission fluid (2) Engine oil (4) Clock (2) Door trim panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Shift knob (2) Pump (1) Fuel pump (3) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (3) Wheel (4) Fuse box (29) Seat (3) Axle shaft (1) Parking sensors (1) Brake system (1) Suspension system (1) Side mirror (2) Warning light – error code (11) (5) Tire pressure warning light (3) Service warning light (73) Fuel cap (6) Windshield wipers (2) Center console tunnel (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos