Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Hydraulic pistons

Jeep Cherokee - Hydraulic pistons

Hydraulic Pistons Jeep Cherokee (1984-2001 / xj, mk 2)

Jeep Cherokee (1984-2001 / XJ, MK 2)
How to Replace the Tailgate Struts on a Jeep Cherokee
In this guide, you will learn how to replace the struts on the tailgate of your Jeep Cherokee. Before starting, ensure you place a support to keep the tailgate …Read all…
Posted on 24 June 2026 by ScegliAuto
Jeep Cherokee (1984-2001 / XJ, MK 2)
How to Replace the Boot Struts on a Jeep Cherokee
Are the struts on your vehicle damaged? Follow this guide to replace the boot struts on a Jeep Cherokee. Lift the boot and secure it (use wooden or metal bars …Read all…
Posted on 31 March 2026 by ScegliAuto
Airbag (2) Alternator (2) Shocks (1) Car stereo (7) Battery (7) Transmission (1) Spark plugs (4) Body (2) Control unit (1) Key (22) Timing belt (7) V-belt (3) Onboard computer (6) Checks and maintenance (21) Bearing (1) MAF sensor (1) Headlight (5) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (9) Diesel fuel filter (3) Parking brake (5) Light bulb (3) Headlight bulb (13) Tail light bulb (6) Interior dome light bulb (2) Handle (2) Engine (4) Power window motor (1) Starter motor (4) Transmission fluid (2) Engine oil (4) Clock (2) Door trim panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Shift knob (2) Pump (1) Fuel pump (3) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (3) Wheel (4) Fuse box (29) Seat (3) Axle shaft (1) Parking sensors (1) Brake system (1) Suspension system (1) Side mirror (2) Warning light – error code (11) (5) Tire pressure warning light (3) Service warning light (73) Fuel cap (6) Windshield wipers (2) Center console tunnel (1) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos