Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Car stereo

Jeep Cherokee - Car stereo

Jeep Cherokee (2013-2023 / KL, MK 5)
How do you remove the car radio from the Jeep Cherokee?
In order to remove the car radio from the Jeep Cherokee, you need to use an object to lever off the control panel of the air conditioning located below the …read all…
Posted on 28 June 2023 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to reset the Uconnect infotaiment system in Fiat cars; Jeep
The procedure for resetting the uconnect system settings in a Fiat is very simple and can be carried out in a few steps. We remind you that this reset …read all…
Posted on 28 August 2022 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How can I replace the stereo on my Jeep Cherokee?
Before you can actually remove the car radio of your Jeep Cherokee you need to use an object that acts as a lever to remove the climate control console. Once …read all…
Posted on 6 August 2022 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to connect your smartphone to the Jeep Grand Cherokee via Bluetooth
The new Jeep Grand Cherokee is equipped with Bluetooth technology thanks to which you can connect your smartphone to listen to music, answer calls and much …read all…
Posted on 22 April 2024 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to replace the car radio of the Jeep Cherokee?
In order to remove the radio from the Jeep Cherokee, you need to use an object that acts as a lever to remove the climate control console. When this has been …read all…
Posted on 1 March 2024 by ScegliAuto
Jeep Cherokee (2002-2007 / KJ, MK 3)
Removing the radio from the dashboard of a Jeep Cherokee
Do we want to replace the radio mounted in the dashboard of a Jeep Cherokee? Let's see the disassembly of the car radio and the plastics. We remove the plastic …read all…
Posted on 12 February 2024 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
How to disassemble the original car stereo on a Jeep Cherokee
Let's see how to disassemble the original car radio on a Jeep Cherokee. First of all we remove the panel of the ventilation grilles with a plastic lever (we …read all…
Posted on 14 October 2023 by ScegliAuto
Jeep Cherokee (2002-2007 / KJ, MK 3)
Disassembly of the radio and air vents
Start removing the air vents on the sides of the car radio by pulling them gently using a plastic tool to avoid damaging the bodywork. Remove the frame and …read all…
Posted on 26 June 2023 by ScegliAuto
Airbags (2) Alternator (2) Shock absorbers (1) Car stereo (8) Battery (8) Spark plugs (3) Control unit (1) Key (15) Timing belt (5) V-belt (3) -board computer (30) Checks and maintenance (29) Bearing (1) Mass air flow sensor (1) Headlight (4) Tail light (3) Air filter (5) Cabin air filter (9) Diesel filter (3) Hand brake (3) Light bulb (2) Headlight bulb (13) Rear light bulb (6) Interior lights ceiling light bulb (2) Handle (2) Engine (4) Window motor (1) Starter motor (3) Gear oil (2) Engine oil (7) Door panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Gear Shift Knob (1) Pump (1) Fuel pump (3) Window lift button (1) Instrument cluster (9) Radiator (3) Passenger compartment heating radiator (3) Wheel (4) Fuse box (16) Seat (3) Drive shaft (1) Parking sensors (1) Suspensions (1) Outside rearview mirror (2) Windscreen wipers (2) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos