Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Car Radio and Air Vents

Model: Jeep Cherokee MK 3, KJ - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

Start by gently removing the air vents on either side of the car radio by pulling them with a plastic tool to avoid damaging the bodywork. Remove the trim and vents by pulling and disengaging them from the clips.

Remove the screws from the dashboard and then the screws from the radio console. Carefully lift the car radio to allow for the removal of the connectors located at the back.

After repairing the radio, refit it by reconnecting all the connectors and then place it back in its slot, taking care not to pinch any cables, and reattach the trim with the vents.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Remove the Original Radio from a Jeep Cherokee
How to Remove the Original Radio from a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Learn how to remove the original radio from a Jeep Cherokee. First, use a plastic lever to remove the air vent panel (disconnect the power connectors…
Removing the Radio from the Dashboard of a Jeep Cherokee
Removing the Radio from the Dashboard of a Jeep Cherokee
Jeep Cherokee (2002-2007 / MK 3, KJ) Want to replace the radio mounted in the dashboard of a Jeep Cherokee? Let's see how to remove the radio and the surrounding plastics. Remove the pla…
How to Remove the Radio from a Jeep Cherokee
How to Remove the Radio from a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) To remove the radio from a Jeep Cherokee, use a tool to lever off the climate control panel located beneath the radio: this will allow you to disconn…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos