Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Radio from a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Car stereo

Learn how to remove the original radio from a Jeep Cherokee. First, use a plastic lever to remove the air vent panel (disconnect the power connectors). Then, using the lever, remove the frame with the air vents. Use a screwdriver to unscrew the securing screws located at the sides of the stereo until it detaches from the dashboard. Now, pull the radio out from the dashboard, disconnect the various power connectors at the back, and the antenna reception cable. Extract the unit from its housing. To reassemble the various removed parts, proceed in reverse order.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How Can I Replace the Stereo in My Jeep Cherokee?
How Can I Replace the Stereo in My Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) Before you can actually remove the stereo from your Jeep Cherokee, use a tool to lever off the climate control console. Once removed, you can loosen …
Removing the Radio from the Dashboard of a Jeep Cherokee
Removing the Radio from the Dashboard of a Jeep Cherokee
Jeep Cherokee (2002-2007 / KJ, MK 3) Want to replace the radio mounted in the dashboard of a Jeep Cherokee? Let's see how to remove the radio and the surrounding plastics. Remove the pla…
Replacing the Front Wiper Blades on the Jeep Cherokee
Replacing the Front Wiper Blades on the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this short and simple video, you will see the steps to dismantle and replace the wiper blades on the Jeep Cherokee. First, move to the front of yo…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos