Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Windshield wipers

Jeep Cherokee - Windshield wipers

Windshield Wipers Jeep Cherokee (2013-2023 / kl, mk 5)

Jeep Cherokee (2013-2023 / KL, MK 5)
How to Replace the Windscreen Wiper Blades on a Jeep Cherokee?
To replace the windscreen wiper blades on a Jeep Cherokee, lift the wiper arm and position the blade perpendicular to the arm. This will allow you to detach …Read all…
Posted on 24 August 2026 by ScegliAuto
Jeep Cherokee (2013-2023 / KL, MK 5)
Replacing the Front Wiper Blades on the Jeep Cherokee
In this short and simple video, you will see the steps to dismantle and replace the wiper blades on the Jeep Cherokee. First, move to the front of your car and …Read all…
Posted on 27 June 2026 by ScegliAuto
Airbag (2) Alternator (2) Shocks (1) Car stereo (7) Battery (7) Transmission (1) Spark plugs (4) Body (2) Control unit (1) Key (22) Timing belt (7) V-belt (3) Onboard computer (6) Checks and maintenance (22) Bearing (1) MAF sensor (1) Headlight (6) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (9) Diesel fuel filter (3) Parking brake (5) Light bulb (3) Headlight bulb (13) Tail light bulb (6) Interior dome light bulb (2) Handle (2) Engine (4) Power window motor (1) Starter motor (4) Transmission fluid (2) Engine oil (4) Clock (2) Door trim panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Shift knob (2) Pump (1) Fuel pump (3) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (3) Wheel (4) Fuse box (29) Seat (3) Axle shaft (2) Parking sensors (1) Brake system (1) Suspension system (1) Side mirror (2) Warning light – error code (11) Tire pressure warning light (9) Service warning light (74) Fuel cap (6) Windshield wipers (2) Center console tunnel (1) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos