Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wiper Blades on the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Windshield wipers

In this short and simple video, you will see the steps to dismantle and replace the wiper blades on the Jeep Cherokee. First, move to the front of your car and begin by lifting the wiper arm; then use something sharp to unclip the small wiper cover to remove it, as shown in the video. At this point, replace the wiper blades with new ones of the correct type and the same size; then reassemble everything, following the same procedure for replacing the rear wiper.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Jeep Cherokee
Where is the fuse box located in the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) If you own a Jeep Cherokee and want to find out where the fuse box is located in the cabin, all you have to do is follow the procedure described in t…
Where is the fuse box for the engine of the Jeep Cherokee located?
Where is the fuse box for the engine of the Jeep Cherokee located?
Jeep Cherokee (2013-2023 / KL, MK 5) To locate the fuse box of the engine of your third edition Jeep Cherokee, you must follow the steps described in the following guide. First of all, t…
Replace Remote Battery for Jeep Cherokee
Replace Remote Battery for Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Is the battery of your Jeep Cherokee flat and needs replacing? Here's how to do it. Open the Jeep remote. Remove the metal key. Once the metal key is…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos