Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windscreen Wiper Blades on a Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Windshield wipers

See other generations:
Video tutorial

To replace the windscreen wiper blades on a Jeep Cherokee, lift the wiper arm and position the blade perpendicular to the arm. This will allow you to detach the blade from the arm so you can insert the new one. Secure the new blade to the arm using the appropriate clip, and repeat the process for the other blade.

Once both blades are correctly installed, lower them onto the windscreen to check that they function properly.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) In this short and simple video, you will see the steps to dismantle and replace the wiper blades on the Jeep Cherokee. First, move to the front of yo…
…
Jeep Cherokee (2013-2023 / KL, MK 5) To replace the parking sensors on a Jeep Grand Cherokee, remove the screws securing the bumper to access its rear section. The parking sensors are lo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos