Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How do i replace the parking sensors on the Jeep Grand Cherokee?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Parking sensors
Operation: How do i replace the parking sensors on the Jeep Grand Cherokee?

In order to replace the parking sensors of the Jeep Grand Cherokee you have to remove the screws that secure the bumper, in order to have access to its rear part. The parking sensors are located immediately above the bumper and will need to be disengaged from their housing. Once the sensor has been removed from its seat, it will be necessary to disconnect it from the connector and connect a new sensor. This will then have to be inserted in the appropriate housing and subsequently it will be possible to mount the bumper. At the end of the replacement it will be necessary to check the correct functioning of the new sensors.


Posted on 2 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos