Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Rear bumper

Jeep Cherokee - Rear bumper

Rear Bumper Jeep Cherokee (1984-2001 / mk 2, xj)

Jeep Cherokee (1984-2001 / MK 2, XJ)
How to Remove the Rear Bumper on a Jeep Cherokee
To remove the rear bumper on a Jeep Cherokee, access the underside of the vehicle to unscrew all the bolts securing the bumper from below. Once all the screws …Read all…
Posted on 3 July 2026 by ScegliAuto
Jeep Cherokee (1984-2001 / MK 2, XJ)
How to remove the bumper on the Jeep Cherokee?
In this tutorial, you will see how to remove the rear bumper on the Jeep Cherokee CJ, a very simple and quick operation. Since the fixing bolts are located on …Read all…
Posted on 1 July 2026 by ScegliAuto
Airbag (2) Alternator (2) Shocks (1) Car stereo (7) Battery (7) Transmission (1) Spark plugs (4) Body (2) Control unit (1) Key (22) Timing belt (7) V-belt (3) Onboard computer (6) Checks and maintenance (22) Bearing (1) MAF sensor (1) Headlight (6) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (9) Diesel fuel filter (3) Parking brake (5) Light bulb (3) Headlight bulb (13) Tail light bulb (6) Interior dome light bulb (2) Handle (2) Engine (4) Power window motor (1) Starter motor (4) Transmission fluid (2) Engine oil (4) Clock (2) Door trim panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Shift knob (2) Pump (1) Fuel pump (3) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (3) Wheel (4) Fuse box (29) Seat (3) Axle shaft (2) Parking sensors (1) Brake system (1) Suspension system (1) Side mirror (2) Warning light – error code (11) Tire pressure warning light (9) Service warning light (74) Fuel cap (6) Windshield wipers (2) Center console tunnel (1) Steering wheel (2)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos