Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Suspension system

Jeep Cherokee - Suspension system

Suspension System Jeep Cherokee (1984-2001 / mk 2, xj)

Jeep Cherokee (1984-2001 / MK 2, XJ)
How to Replace the Rear Suspension of a Jeep Cherokee
In today's tutorial, you will learn how to remove and replace the rear shock absorbers of a Jeep Cherokee by following these simple and quick steps. First, …Read all…
Posted on 25 June 2026 by ScegliAuto
Airbag (2) Alternator (2) Shocks (1) Car stereo (7) Battery (7) Transmission (1) Spark plugs (4) Body (2) Control unit (1) Key (22) Timing belt (7) V-belt (3) Onboard computer (6) Checks and maintenance (22) Bearing (1) MAF sensor (1) Headlight (6) Tail light (3) Fog lights (1) Air filter (5) Cabin air filter (9) Diesel fuel filter (3) Parking brake (5) Light bulb (3) Headlight bulb (13) Tail light bulb (6) Interior dome light bulb (2) Handle (2) Engine (4) Power window motor (1) Starter motor (4) Transmission fluid (2) Engine oil (4) Clock (2) Door trim panel (11) Windshield (2) Front bumper (2) Rear bumper (2) Brake pads (4) Hydraulic pistons (2) Shift knob (2) Pump (1) Fuel pump (3) Power window switch (1) Instrument cluster (2) Radiator (3) Heater core (3) Wheel (4) Fuse box (29) Seat (3) Axle shaft (2) Parking sensors (1) Brake system (1) Suspension system (1) Side mirror (2) Warning light – error code (11) Tire pressure warning light (9) Service warning light (74) Fuel cap (6) Windshield wipers (2) Center console tunnel (1) Steering wheel (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos