Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Suspension of a Jeep Cherokee

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Suspension system

In today's tutorial, you will learn how to remove and replace the rear shock absorbers of a Jeep Cherokee by following these simple and quick steps. First, lift the vehicle and start by loosening the lower bolt of your suspension using a socket spanner; apply some penetrating oil if it is difficult to remove. At this point, unscrew the upper bolt to completely remove the shock absorber; then replace the suspension with the correct new one and reassemble everything, applying the reverse procedure!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Put the Jeep Cherokee in Jack Mode
How to Put the Jeep Cherokee in Jack Mode
Jeep Cherokee (2013-2023 / KL, MK 5) To activate the "Tire Jack Mode" on a Jeep Cherokee with air suspension, follow these steps: turn on the ignition and go to "controls/settings/suspen…
Where is the fuse box located in the 2012 Jeep Cherokee?
Where is the fuse box located in the 2012 Jeep Cherokee?
Jeep Cherokee (2008-2012 / MK 4, KK) The 2012 Jeep Cherokee has a fuse box inside. The fuse box is located under the bonnet, specifically on the right side, near the engine. To view the …
Where is the fuse box located in the Jeep Cherokee
Where is the fuse box located in the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) If you own a Jeep Cherokee and want to find out where the fuse box is located in the cabin, all you have to do is follow the procedure described in t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos