Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the air filter in the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: Air filter
Operation: How to replace the air filter in the Jeep Cherokee

In today's video we see how to replace the air filter in the Jeep Cherokee. This operation is a very simple job, as you will see, which can be carried out in total autonomy. We unscrew the fixing pins of the plastic cover of the intake. We now remove the central plastic cover and then the suction cover. We take out the old air filter and clean the area if necessary. We then install an air filter of the same type. Let's now proceed to reinstall the relevant covers and then screw the fixing pins back on. Let's close the hood and we're done.


Posted on 19 April 2024 by ScegliAuto



How to replace the air filter in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) .. In this video we can see how to replace the air filter in the Jeep Cherokee. For this simple operation we need a Phillips screwdriver...
Cabin air filter replacement on 2020 Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) Let's see in this video how to remove and replace, in simple steps, the cabin air filter on a 2020 Jeep Cherokee. First of all, let's find the cabin
How to replace the air filter on the Jeep Cherokee?
Jeep Cherokee (2013-2023 / MK 5, KL) The replacement of the Jeep Cherokee air filter is carried out by opening the hood and accessing the engine compartment, so that the box containing t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos