Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years 2013-2023
Part: Front bumper

Today, in this short and simple guide, we will see the procedure to remove and replace the front bumper of a Jeep Cherokee. First, open the bonnet of your car and start removing the plastic clips from the bumper grille to take it off; then undo all the fixing screws and remove the additional clips located on both sides of the wheel arches, as shown in the video. At this point, remove the clips found under the bumper; start detaching the bumper from the sides until it is completely removed, following the video tutorial to the end!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Jeep Cherokee
How to Remove the Front Bumper from a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) To remove the front bumper from a Jeep Cherokee, access the inside of the bumper to disconnect the underlying connectors. Once these are disconnected…
How to Remove the Front Headlight from My Jeep Cherokee?
How to Remove the Front Headlight from My Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) Replacing the front headlight on your Jeep Cherokee is a very simple task. To access it better, first detach the front bumper by unscrewing the bolts…
How to Remove the Rear Bumper on a Jeep Cherokee
How to Remove the Rear Bumper on a Jeep Cherokee
Jeep Cherokee (1984-2001 / XJ, MK 2) To remove the rear bumper on a Jeep Cherokee, access the underside of the vehicle to unscrew all the bolts securing the bumper from below. Once all t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos