Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

Today, you will learn how to remove and replace the front headlight bulb on a Jeep Compass. First, remove the screws from the wing on the affected side and try to move it away by turning the front wheel; this will give you access to the back of the lamp.

At this point, disconnect the electrical connector of the bulb and pull it out along with the bulb holder: then remove the bulb and replace it with a new one of the correct type and fitting. Finally, reassemble everything by applying the reverse procedure!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
How to Replace the Front Headlamp Bulb on a Jeep Compass
How to Replace the Front Headlamp Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlamp bulb on a Jeep Compass, loosen the screws securing the inner wheel arch cover near the bulb that needs replacing. Once …
How to Replace the Front Headlamp Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlamp bulb on a Jeep Compass, open the bonnet to access the components inside the engine bay. Inside the headlamp, locate the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos