Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlamp Bulb on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Headlight bulb

To replace the front headlamp bulb on a Jeep Compass, loosen the screws securing the inner wheel arch cover near the bulb that needs replacing. Once the cover is removed, access the inside of the headlamp by pulling the bulb out of the optical unit and disconnecting it from the connector. At this point, connect the new bulb to the corresponding connector so that it can be inserted into the optical unit; after installation, ensure everything functions correctly.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Jeep Compass (2016-2025 / 552, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Jeep Compass. First, remove the screws from the wing on the affected si…
Jeep Compass (2016-2025 / 552, MK 2) To replace the front headlight bulb on a Jeep Compass, open the bonnet to access the components inside the engine bay: for the right headlight, it wi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos