Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Headlight bulb

How do you replace the front headlamp bulb on a Jeep Compass? Use a suitable screwdriver to remove the plastic cover at the bottom of the bumper; this will give you access to the front headlamp located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the car's bumper with the attached clips. Test the correct operation of the lights. Perform this replacement on the front headlamps to ensure consistent lighting. Test the operation of the lights.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Replacing the Front Headlight Bulb on a Jeep Compass
Replacing the Front Headlight Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Jeep Compass. First, remove the screws from the wing on the affected si…
How to replace the front headlight bulb of the Jeep Compass
How to replace the front headlight bulb of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) These short and simple steps will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Jeep Compass. Fir…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos