Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

See other generations:
Video tutorial

These brief and simple steps will allow you to remove and replace the dipped and main beam bulb of the headlight on the Jeep Compass. First, open the bonnet and remove the plastic cover protecting the bulbs; then access it from the wheel arch (detaching it) to remove the dipped beam bulb by disconnecting the electrical connector, as shown in the video.

Now, install the new bulb of the correct type and fitting, ensuring it is properly seated in the headlamp assembly, and finally reattach the wheel arch liner and the cover!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Replacing the Front Headlight Bulb on a Jeep Compass
Replacing the Front Headlight Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Jeep Compass. First, remove the screws from the wing on the affected si…
How to Replace the Front Headlamp Bulb on a Jeep Compass
How to Replace the Front Headlamp Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) How do you replace the front headlamp bulb on a Jeep Compass? Use a suitable screwdriver to remove the plastic cover at the bottom of the bumper; thi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos