Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Compass
    4. : How to replace headlight bulbs on Jeep Compass

Jeep Compass - Video tutorial

Model: Jeep Compass MK 49, MK 1 - Years 2006-2016
Part: Headlight bulb
Operation: How to replace headlight bulbs on Jeep Compass

Let's see how to replace the headlight bulbs on Jeep Compass: open the front hood by pulling the lever at the bottom right of the dashboard, let's secure it with the plastic rod. We find the inspection cap of the headlight (placed in the rear part of the headlight if present) and remove it. We disconnect the lamp holders from the headlight and go to extract the damaged bulbs with the help of a screwdriver. We fit the new bulbs and (always suitable type and size) we insert the lamp holder in the headlight housing. We reassemble all the previously disassembled pieces and test the lights.


Posted on 3 November 2023 by ScegliAuto



Replacing the headlight bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Replacing Damaged Headlight Bulbs on a Jeep Compass? Let's see how they replace each other. We open the front hood, pulling the lever located at the
Replacing the headlight bulbs of a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Burnt out headlight bulbs? Let's see how to replace the Jeep Compass headlight bulbs. We unscrew the plastic coating in the lower part of the bumper
Replacing the rear bulbs on Jeep Compass
Jeep Compass (2016-2024 / 552, MK 2) To replace the headlight bulbs on Jeep Compass but also on other Jeep models, start by lifting the trunk lid. Now, using a flat head screwdriver, unc

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos