Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How do you replace the rear light bulb on your Jeep Wrangler?

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Light bulb
Operation: How do you replace the rear light bulb on your Jeep Wrangler?

In order to replace the rear light bulb of the Jeep Wrangler, it is necessary to unscrew the four screws that fix the lighthouse, so that it can be extracted from its housing. Once it has been removed, it will be possible to extract the bulb from the rear part of the light itself, disconnecting it from its connector. It will be necessary to connect the new bulb to it, which must consequently be inserted inside the headlight. Once the bulb has been connected, it will be possible to fix the lighthouse again to its housing with the screws previously removed.


Posted on 30 November 2022 by ScegliAuto



How to replace the front indicator light bulb on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In order to replace the front indicator light bulb on the Jeep Wrangler you need to access the inside of the front bumper, so that you can disconnect
How to replace the headlight bulb on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In order to replace the headlight bulb on the Jeep Wrangler it will be necessary to open the hood so that the bolts in the upper part of the front gr
How do you remove the rear taillight of the Jeep Wrangler?
Jeep Wrangler (2018-2024 / JL, MK 4) In order to remove the rear light of the Jeep Wrangler, you need to open the rear door to access the side of the trunk where the light is located. He

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos