Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Indicator Bulb Replacement

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

Replacing the front indicator bulb, located just below the headlamp, is very simple as there is enough space to reach the back of the indicator. Disconnect the bulb holder by turning it anti-clockwise and pull out the old bulb from its socket.

Then, insert the new bulb, ensuring it fits perfectly into its socket. Position the bulb holder and check that the bulb lights up correctly.

Also consider replacing the bulb of the other indicator as a precaution.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Bulb on a Jeep Wrangler
How to Replace the Indicator Bulb on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If you want to replace the front indicator bulb on this car model, the following description provides the correct instructions and methods for the re…
How to Replace the Cabin Air Filter on Jeep Wrangler 4XE
How to Replace the Cabin Air Filter on Jeep Wrangler 4XE
Jeep Wrangler (2018-2026 / JL, MK 4) If it's time to replace the cabin air filter in your Jeep Wrangler 4XE, and you don't know the steps to complete the operation, just read the followi…
How to Replace the Brake Pads on a Jeep Wrangler?
How to Replace the Brake Pads on a Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) The procedure for replacing the brake pads on a Jeep Wrangler is the same for both the front and rear wheels. You will need to lift the vehicle so th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos