Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb of a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

To replace the front headlamp bulb of a Jeep Wrangler, first open the bonnet to access the bolts at the top of the front grille. Once released, you can remove the grille to access the front headlamps.

Free the headlamps from their housing by unscrewing the fixing screws. Disconnect the connector at the back of the headlamp to pull it out of its housing and replace the bulb inside.

After replacing the bulb, reassemble all components.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to replace the rear light bulb on a Jeep Wrangler?
How to replace the rear light bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the rear light bulb on a Jeep Wrangler, unscrew the four screws that secure the light, allowing it to be removed from its housing. Once re…
How to Replace the Front Headlight Bulb in a Jeep Wrangler?
How to Replace the Front Headlight Bulb in a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) In this video, you can see how to replace the front headlight bulb in the Jeep Wrangler, a very simple and quick operation. First, remove the front g…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos