Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb in a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this video, you can see how to replace the front headlight bulb in the Jeep Wrangler, a very simple and quick operation. First, remove the front grille by taking out the 6 plastic rivets located at the top. Once removed, unclip the lower clips as well.

At this point, unscrew the 4 fixing screws of the headlight using a Torx T15 key, extract it from the bodywork, and remove the bulb holder by turning it counterclockwise. Finally, replace the bulb, avoiding touching it with bare hands, and reassemble everything by following the reverse procedure.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of a Jeep Wrangler
How to Replace the Front Headlamp Bulb of a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp bulb of a Jeep Wrangler, first open the bonnet to access the bolts at the top of the front grille. Once released, you c…
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
How to Replace the Front Headlamp Bulb on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front headlamp bulb on a Jeep Wrangler, use a screwdriver to loosen the screws securing the front grille located just above the bumper…
How to Replace the Headlight Bulbs in the Jeep Wrangler?
How to Replace the Headlight Bulbs in the Jeep Wrangler?
Jeep Wrangler (1997-2007 / MK 2, TJ) In this video, you can see how to replace the headlight bulbs in the Jeep Wrangler. For this simple and quick operation, you will need a cross-head s…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos